** Technical specifications apply to trailers in standard configuration. Optional equipment may affect the presented technical data.
Cargo trailer CP250-L PRIME
Product code: EC0030TI
kr18 290,00
Description
The PRIME series trailer is a multi-talent - suitable for both entrepreneurs and hobbyists. The CP Prime series is a trailer with a sturdy all-welded frame, designed for frequent use, even for heavier loads.
The trailer is made of hot-dip galvanized sheet metal, suitable for northern conditions. Strong 2-groove side profiles increase trailer rigidity. Leaf suspension with shock absorbers reduces the effect of potholes on the trailer and improves driving characteristics. Waterproof hubs ensure a longer life for the bearings. Metal step-resistant fenders and step boards enable more comfortable use of the trailer. The cargo box is equipped with strap loops on the inside and hooks on the outside to secure the load. Strap loops are attached to the side posts of the trailer to ensure greater tensile strength when securing the load. In addition, the bottom of the trailer can be fully utilized in this way, and the fastening loops do not interfere with loading and unloading (e.g. bulk material). The tilting cargo box and fully welded frame tailgate allows the trailer to be used for loading and unloading lighter vehicles (lawn tractor, ATV, etc.).
Standard Equipment
13-pin plug
2+2 lashing hooks (outboard the box)
3+3 lashing eyes (inboard the box)
Box tilt
Durable 3-leaved leaf spring axle
Fully welded frame
Hatches on a fully welded frame
Jockey wheel
LED position lights
Laminated waterproof plywood floor 12mm
Removable front and rear hatch
Step boards
Box width (m)
1.23
Box length (m)
2.5
Load capacity (kg)
522
Trailer width (m)
1.64
Unladen weight (kg)
228
Border height (m)
0.33
Brakes
NO
Trailer length (m)
3.88
Number of wheel bolts
4
Frame
Welded
Tyres
155R13 M+S
Axle
Leaf Spring
Gross weight (kg)
750
Accessories
Soft Dock cover for coupling without brakes
Product code: 502456
Select
Spare wheel R13 155 4×100 84 N M+S
Product code: 502803
Select
LED light 5PIN 12-36V right
Product code: 503099
Select
LED light 5PIN 12-36V left
Product code: 503100
Select
Male plug adapter 13-7, without wire
Product code: 503418
Select
Load strap with tensioner 5m
Product code: 507043
Select
Tent CP250 flat, gray. The set includes a rubber cord and fastening buttons. Support brackets are not included (recommended 3 pcs).
Product code: 507063
Select
Hitch lock mechanism "Tikitilhenger" (padlock is not included in the set)
Product code: 610492
Select
Spare wheel holder (drawbar arm cross-section 30mm)
Product code: 660006
Select
Toolbox 50x17x20cm (for trailer panel)
Product code: 660019
Select
Motorcycle holder (attachable to trailer plywood floor)
Product code: 660021
Select
Support stand set, CP-line (1 pc)
Product code: 660185
Select
Tent support, short. For trailers width of 1100 – 1500 mm
Product code: 660317
Select
Spare wheel holder (drawbar arm cross-section 30mm)
Product code: 660668
Select
CP backhatch chains set for border height 330/400mm
Product code: 661911
Select
Side extension set CP250-L (h=320mm)
Product code: P01002
Select
Spare Parts
Step board CP, right
Product code: 450078
Select
Step board CP, left
Product code: 450079
Select
Fender 212x740mm for cargo trailer
Product code: 450176
Select
Plywood 1220x2470x12mm (CP250)
Product code: 501006
Select
Wheel hub by KNOTT, 675 kg
Product code: 502000
Select
Jockey wheel 150kg
Product code: 502617
Select
Clamp for jack / jockey wheel (48mm diameter)
Product code: 502618
Select
13-pin plug, 2 screw holes
Product code: 503030
Select
Rear light Aspöck Multipoint V 5pin left
Product code: 503057
Select
Rear light Aspöck Multipoint V 5pin right, with reversing light
Product code: 503059
Select
Marker light LED Aspöck rubber arm, left/right, white
Product code: 503066
Select
Box latch (on drawbar)
Product code: 504000
Select
Panel latch
Product code: 504101
Select
Lashing eye
Product code: 504402
Select
Panel hinge coupling for frame SPP
Product code: 504409
Select
Hinge for trailer end panel 220mm
Product code: 504411
Select
Hinge bolt for end panel hinge
Product code: 504412
Select
Oil seal 42x56x7mm
Product code: 507016
Select
Tent fastening button
Product code: 507039
Select
Wheel bearing compact 34x64x37mm
Product code: 507042
Select
Hub cap 64 mm, for axle up to 1500 kg
Product code: 507083
Select
Wire set CS200/265 CP250/275
Product code: 530123
Select
Safety cable 5mm/0.2m
Product code: 610435
Select
Edit Template
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.